Design and Development of Z-Robot for industrial Applications
J. Indra1, R. Kiruba Shankar2, N. Ilakkiya3, S. Indujha4, S. Guhan5
1J.Indra*, Associate Professor, Department of Electronics and Instrumentation Engineering, Kongu Engineering College, Perundurai, Erode, Tamil Nadu, India.
2R.Kirubashankar, Associate Professor, Department of Mechatronics Engineering, Kongu Engineering College, Perundurai, Erode.
3N. Ilakkiya, Department of Electronics and Instrumentation Engineering, Kongu Engineering College, Perundurai, Erode.
4S.Indujha, B.E. Electronics and Instrumentation Engineering at Kongu Engineering College, Perundurai, Erode.
5S.Guhan, B.E. Electronics and Instrumentation Engineering at Kongu Engineering College, Perundurai, Erode.
Manuscript received on October 11, 2019. | Revised Manuscript received on 23 October, 2019. | Manuscript published on November 10, 2019. | PP: 1983-1989 | Volume-9 Issue-1, November 2019. | Retrieval Number: K22910981119/2019©BEIESP | DOI: 10.35940/ijitee.K2291.119119
Open Access | Ethics and Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: The last few decades have demonstrated the benefit of fast, vast and inexpensive robots in production sectors. Robots in the industry can be cooperative or supportive to the workers. Some significant tasks such as, industrial automation, painting, welding, package loading and unloading, cutting and application specific tasks can be performed using industrial robotic arm. The aim of the project is to pick and place the objects in industries using robot arms. Z-Robot is a double arm robot. The robot arms follow the loop in a program to run the servo motors. Arduino program stores the position of each motor. When the pick command is received servo motors fixed with the robot arms start rotating based on the program and picks up the object. When the drop command is received the robot arms drops down the object. The pick and place operations can be done in any direction. End effectors connected with arm setup is used to pick and place the object.
Keywords: Robot, arm, Pick and Place
Scope of the Article: Robotics Engineering