Design, Modeling & Simulation of Analysis of coupling to Cables due to Electromagnetic Pulse (EMP)
Priti Mandal1, B. Venkata Ramana2, P.V.Y Jayasree3
1Priti Mandal, M.Tech (RFME), GITAM (Deemed to Be University), Visakhapatnam, A.P India.
2B. Venkata Ramana, Scientist-C, SAMEER-CE3, Visakhapatnam, A.P India
3Dr. P.V.Y Jayasree, Professor (HOD), GITAM (Deemed to be University), Visakhapatnam, A.P India
Manuscript received on 30 June 2019 | Revised Manuscript received on 05 July 2019 | Manuscript published on 30 July 2019 | PP: 78-85 | Volume-8 Issue-9, July 2019 | Retrieval Number: I7485078919/19©BEIESP | DOI: 10.35940/ijitee.I7485.078919
Open Access | Ethics and Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: This paper is to analyze the EMP coupling to cables using 3D EM Modeling and Simulation Analysis. Bounded wave transmission line structure as per MIL-STD 461, RS105 EMP requirement in terms of peak electric field of 50KV/m with rise time-2.3ns and pulse width-25ns was developed. Single conductor cable, RF Coaxial cable were modeled. EMP Coupling to cables was carried out by placing the cable under generated EMP field in terms of induced voltage and currents due to EMP fields. EMP coupling to active line with matched termination also analyzed.
Keywords: Electromagnetic pulse (EMP), Bounded wave
Transmission line, cables.
Scope of the Article: Low-power design