Trapezoid Shape Patch Antenna for WLAN Application
Pooja1, Davinder Parkash2, Harbinder Singh3
1Pooja, Department of Electronics & Communication Engineering, Chandigarh University, Mohali (Punjab), India.
2Davinder Parkash, B. Tech, Department of Electronics & Communication Engineering, Chandigarh University, Mohali (Punjab), India.
3Harbinder Singh, Department of Electronics & Communication Engineering, Chandigarh University, Mohali (Punjab), India.
Manuscript received on 05 August 2019 | Revised Manuscript received on 12 August 2019 | Manuscript Published on 26 August 2019 | PP: 512-516 | Volume-8 Issue-9S August 2019 | Retrieval Number: I10810789S19/19©BEIESP | DOI: 10.35940/ijitee.I1081.0789S19
Open Access | Editorial and Publishing Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open-access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: In this paper, CPW fed Trapezoid shape patch antenna is analyzed and investigated for Wireless Local Area Network (WLAN) application. The proposed antenna is fabricated on FR4 substrate having dimensions of 19mm ×21.2mm ×1.6mm. It resonates at 5.44 GHz frequency with peak return loss of 25.8 dB. The parametric study of proposed antenna is carried out to understand the effect of different values of ground plane on the impedance bandwidth, return loss of the antenna and also to optimize the antenna parameters. The CPW-fed is used to enhance the bandwidth and to reduce the return loss of the antenna. The importance of different design parameters like current distribution, S-parameter, gain, and radiation pattern are studied. The results of the proposed antenna are useful for WLAN Application.
Keywords: Bandwidth, CPW-Feed, Patch Antenna, WLAN and Return loss.
Scope of the Article: Micro Strip Antenna