Researchof Water Quality and its Chemical Parameters by Titration Method and Instrumenal Method
S Janaki Raman1, Samuel Abraham2, D. Jayalin3, Antony godwin4
1S Janaki Raman, Assistant Professor, Department of Civil Engineering, Karunya Institute of Technology and Sciences, Coimbatore (TamilNadu), India.
2Samuel Abraham, Assistant Professor, Department of Civil Engineering, Karunya Institute of Technology and Sciences, Coimbatore (TamilNadu), India.
3D. Jayalin, Assistant Professor, Department of Civil Engineering, Karunya Institute of Technology and Sciences, Coimbatore (TamilNadu), India.
4Antony Godwin, Assistant Professor, Department of Civil Engineering, Karunya Institute of Technology and Sciences, Coimbatore (TamilNadu), India.
Manuscript received on 10 April 2019 | Revised Manuscript received on 17 April 2019 | Manuscript Published on 26 July 2019 | PP: 871-874 | Volume-8 Issue-6S4 April 2019 | Retrieval Number: F11760486S419/19©BEIESP | DOI: 10.35940/ijitee.F1176.0486S419
Open Access | Editorial and Publishing Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open-access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: The water quality analysis is an important aspect in understanding the behavior of water and what can they be used for. This study gives us a valuable information on the general properties of water quality parameters like pH, electrical conductivity, TDS, Bicarbonate, Sulfate, Nitrate, chloride etc. of the study area . Water samples were analyzed at the water quality lab. NIH, Roorkee for pH, electrical conductivity and total dissolved solids. The pH of water varied from 7.14 to 7.75. The electrical conductivity (EC) of sample falls from 620µS/cm to 2000µS/cm. The overall total dissolved solids in water of study area varied from 120mg/l to 900mg/l. Overall the range of the Chloride in water of the study area tend to falls between 13mg/l to 375mg/l. Sulfate of all the water samples that were collected from the study area have ranged from 28mg/l to 250mg .The range of the Bicarbonate of all the water samples varied from 320mg/l to 1051mg/l. The study area helps to know about water quality parameters and how to find their values by using two methods : 1) titration method 2) instrumental method .It also helps us to apply these water quality parameters in Arc Gis. It helps us to show the values of different parameters in different blocks of ambala for different years In this we have studied different blocks of ambala district Haryana .We have taken the samples from different places from the blocks and also samples are from wells, canal , rivers, ponds
Keywords: Stretcher, Patient Transfer, Safety the stretcher is only designed for linear movement.
Scope of the Article: Computational Techniques in Civil Engineering