Analysis of MRR and SR of Die Steel H-11
Dharuv Singla1, K. S. Dhillon2, Tarun Goyal3, Harpreet Singh Oberoi4
1Dharuv Singla, Department of Mechanical, Sri Sukhmani Institute of Engineering and Technology, Dera Bassi India.
2K. S. Dhillon, Department of Mechanical, Sri Sukhmani Institute of Engineering and Technology, Dera Bassi India.
3Dr. Tarun Goyal, Department of Mechanical, Shaheed Udham Singh College of Engineering and Technology, Tangori India.
4Harpreet Singh Oberoi, Department of Mechanical, Shaheed Udham Singh College of Engineering and Technology, Tangori India.
Manuscript received on 17 October 2014 | Revised Manuscript received on 24 October 2014 | Manuscript Published on 30 October 2014 | PP: 5-8 | Volume-4 Issue-5, October 2014 | Retrieval Number: E1808104514/14©BEIESP
Open Access | Editorial and Publishing Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: This study has been done on Die Steel H-11 with the Electro discharge machining. Input parameters are current, pulse on time, pulse off time and flushing pressure. Hexagonal copper electrode is used as a tool. The work has been analyzed by using Taguchi’s method for the material removal rate (MRR) and surface roughness (SR). Pulse on time is most effective for MRR and current is most effective for SR.
Keywords: H-11, EDM, MRR, SR, Taguchi Design.
Scope of the Article: Machine Design