Enhancement in Welding Performance of 2% Maximum Weld Repair Policy
Firman Edi1, Suparno2, M. Giatman3
1Firman Edi, Technology & Vocational Eduction Program, Padang State University, Padang, Indonesia.
2Suparno, Technology & Vocational Eduction Program, Padang State University, Padang, Indonesia.
3M. Giatman, Technology & Vocational Eduction Program, Padang State University, Padang, Indonesia.
Manuscript received on 10 January 2020 | Revised Manuscript received on 06 February 2020 | Manuscript Published on 20 February 2020 | PP: 194-199 | Volume-9 Issue-3S January 2020 | Retrieval Number: C10430193S20/2020©BEIESP | DOI: 10.35940/ijitee.C1043.0193S20
Open Access | Editorial and Publishing Policies | Cite | Zenodo | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open-access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: In the implementation of welding work on a modular oil & gas fabrication project in PT. X Batam to get welding results that are 100% very difficult to achieve and always obtain welding results through visual inspection tests and Non-Destructive Test is rejected or defect that the repair welding must be done to fix it. The causes of welding repair are classified into two, namely repair due to lack of skill welder or due to engineering aspects. With that the management of PT. X Batam issued a policy of 2% maximum welding repair for each structural welding job as a KPI’s and part of the company’s quality manual to monitor and control of welder’s performance in every project implemented. From the results of the 2% maximum KPI welding repair policy obtained significant enhancement on the performance of welders in every project undertaken and shown from the results of KPI values in 2014 the TEN FPSO E-house project was 1.2%, in 2015 the FPSO Kraken PGM project was 1.5 %, in 2016 the Ghana PGM FPSO project is 0.8%, in 2017 the Adolo Compressor FPSO project is 0.75%, in 2018 the TCO Area E-house project is 0.65% and in 2019 is ongoing the BGC TEG Regeneration unit project is 1.25%.
Keywords: Project, Welding Repair, Performance, KPI and Policy.
Scope of the Article: Welding Technology