Columns with Different Cross Section using ANSYS Work Bench
Prabhu. L1, Aravindan. V2, Amal Joseph3, Edwin Joseph4, Abhijith V R5
1L. Prabhu, Associate Professor, Department of Mechanical Engineering, Aarupadai Veedu Institute of Technology Vinayaka Mission Research Foundation, India.
2Aravindan Varadan, Assistant Professor, Department of Mechanical, Aarupadai Veedu Institute of Technology, Vinayaka Mission’s Research Foundation, Deemed To Be University, India.
3Amal Joseph, UG Student, Department of Mechanical Engineering, Aarupadai Veedu Institute of Technology, Vinayaka Mission Research Foundation, India.
4Edwin Joseph, UG Student, Department of Mechanical Engineering, Aarupadai Veedu Institute of Technology, Vinayaka Mission Research Foundation, India.
5Abhijith V R, UG Student, Department of Mechanical Engineering, Aarupadai Veedu Institute of Technology, Vinayaka Mission Research Foundation, India.
Manuscript received on 09 November 2019 | Revised Manuscript received on 17 December 2019 | Manuscript Published on 31 December 2019 | PP: 469-473 | Volume-9 Issue-2S4 December 2019 | Retrieval Number: B12151292S419/2019©BEIESP | DOI: 10.35940/ijitee.B1215.1292S419
Open Access | Editorial and Publishing Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open-access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: In this paper we are going to analyze the strength of material and deflection due to applying load on the column. The column of different materials will be cross sectioned and will present the difference of strength of materials by ANSYS workbench. The strength of material will depend upon the young’s modulus and moment of inertia of the metal plate. We use different size of metal plates such as I-section, circular bar, rectangular bar and square bar for a specific material to know the strength of material when a load applied on the cross sections. In this paper we taken a condition that one side of column is fixed and another side is free when load is applying on the column.
Keywords: ANSYS Workbench, Column, Crippling Load, Buckling.
Scope of the Article: Mechanical Maintenance