Implementation of Thin Walled Steel Sections
S. J. Mohan1, S. Thendral2, A. Arunya3, R. Chitra4
1S. J. Mohan, Assistant Professor, Department of Civil Engineering, Bharath Institution of Higher Education and Research, (Tamil Nadu), India.
2S. Thendral, Assistant Professor, Department of Civil Engineering, Bharath Institution of Higher Education and Research, (Tamil Nadu), India.
3A. Arunya, Assistant Professor, Department of Civil Engineering, Bharath Institution of Higher Education and Research, (Tamil Nadu), India.
4R. Chitra, Asistant Professor, Department of Civil Engineering, Bharath Institution of Higher Education and Research, (Tamil Nadu), India.
Manuscript received on 05 November 2019 | Revised Manuscript received on 13 December 2019 | Manuscript Published on 31 December 2019 | PP: 100-102 | Volume-9 Issue-2S4 December 2019 | Retrieval Number: B10841292S419/2019©BEIESP | DOI: 10.35940/ijitee.B1084.1292S419
Open Access | Editorial and Publishing Policies | Cite | Zenodo | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open-access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: Metallic flimsy sheets are twisted as basic segment to use in the use of numerous mechanical and private structures. These areas which are utilized in the structural building applications are called slight walled segments. They are made out utilizing press break machines or by rolling. The material thickness shifts from 0.20mm to 8.00mm. Powerful propelled machines are likewise accessible to make cold framed segments up to 12 mm. thickness.
Keywords: Break Machines, Propelled Machines, Metallic Flimsy Sheets.
Scope of the Article: Structural Evaluation of Panelized and Masonry Wall Systems