Oil Purification Devices Used in Internal Combustion Engines
Shavkat Imomov1, Nargiza Kholikova2, Zebo Alimova3, Ikrom Nuritov4, Nargiza Temirkulova5
1Shavkat Imomov, Tashkent Institute of Irrigation and Agricultural Mechanization Engineers, Tashkent, Uzbekistan.
2Nargiza Kholikova, Tashkent Institute of Irrigation and Agricultural Mechanization Engineers, Tashkent, Uzbekistan.
3Zebo Alimova, The Tashkent Institute of Projection, Building and Maintenance of Automobile Roads, Tashkent, Uzbekistan.
4 Ikrom Nuritov, Tashkent Institute of Irrigation and Agricultural Mechanization Engineers, Tashkent, Uzbekistan.
5Nargiza Temirkulova, Tashkent State Agrarian University, Tashkent, Uzbekistan..
Manuscript received on October 12, 2019. | Revised Manuscript received on 22 October, 2019. | Manuscript published on November 10, 2019. | PP: 3103-3107 | Volume-9 Issue-1, November 2019. | Retrieval Number: A9141119119/2019©BEIESP | DOI: 10.35940/ijitee.A9141.119119
Open Access | Ethics and Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: The article presents, developed operating modes and substantiates the parameters of a device that cleans motor oils from oxidation products and the resulting analytical relationships representing the movement of a mixture of acetone and used motor oil in viscosity states and the process of evaporation of the solvent from the oil during processing. It also substantiates the speed of movement of motor oil on a coneshaped surface based on its effect on refining and substantiates the dependence of the quality of refined oil on the temperature indicator of the mixture and the availability of the evaporation process and it was also found that motor oils are intensively contaminated with oxidation products during processing, thereby accelerating the friction process. During agricultural work, tractor engines due to congestion and oxidation of carbon, the content of carbine, carbide and asphalt products increases by 1.2%. Oxidizing products accelerate the deterioration of the quality of oils, which leads to an increase in the power consumption of the engine KShM and CPG by 15%. In addition, analytical relationships were obtained representing the movement of a mixture of acetone and used motor oil in viscosity states and the process of evaporation of the solvent from the oil during processing. The speed of motor oil on a cone-shaped surface is substantiated based on its effect on refining, and the dependence of the quality of refined oil on the temperature of the mixture and the availability of the evaporation process is justified
Keywords: Technology, Method, Oils, Environmental Protection, Regeneration, Cleaning, Problem, Disposal, Membrane, Filter, Oil Collection.
Scope of the Article: Environmental Engineering