Teoretiko-Experimental Method of Definition of Parameters of the Roller with the Rubber Plug of the Device for Drawing of the Polymeric Composition on Lines of Sewed Materials
Sh.H.Behbudov1, A.Dj.Djuraev2, A.R.Amonov3, D.X.Qodirova4
1Shavkat Husenovich Behbudov*, Phd, Senior Teacher of the Bukhara Enginering Technological Institute, Bukhara, Uzbekistan.
2Anvar Djuraevich Juraev, Doctor of Technical Sciences, Professor, Department of General Technical Disciplines, Tashkent Institute of Textile and Light Industry, Tashkent City, Shohjahon, Tashkent, Uzbekistan.
3Abdurakhmon Rafiq o`gli Amonov, Teacher of the Bukhara Enginering Technological Institute, Bukhara, Uzbekistan.
4Dilnoza Xayriddinovna Qodirova, Teacher of the Bukhara Enginering Technological Institute, Bukhara, Uzbekistan.
Manuscript received on October 15, 2019. | Revised Manuscript received on 22 October, 2019. | Manuscript published on November 10, 2019. | PP: 2069-2074 | Volume-9 Issue-1, November 2019. | Retrieval Number: A4008119119/2019©BEIESP | DOI: 10.35940/ijitee.A4008.119119
Open Access | Ethics and Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: In article the device for drawing of a polymeric composition on lines of ground off materials is resulted. Dynamics of the machine unit is considered, laws of movement of rollers of the device are defined, to a basis of the analysis of graphic dependences recommended parameters of system are proved. On a basis full factorial experiments parameters of the device for various sewed materials are recommended.
Keywords: Device, a Roller, the Elastic Plug, a Polymeric Composition, Durability, the Machine Unit, the Movement law, Parameters, Full Factor, Rigidity, Frequency, the Expense.
Scope of the Article: Frequency Selective Surface