Optimization of Input Parameters with Carbide Inserts and HSS Tool on CNC Turning of EN19 Steel
A. Kriyadeesh1, P. Srinivas Rao2, C. Labesh Kumar3
1A Kriyadeesh* studying M.tech in Mechanical Engineering, Institute of Aeronautical Engineering, Dundigal, Hyderabad.
2Dr.P.Srinivas Rao, Department of Mechanical Engineering. Institute of Aeronautical Engineering, Dundigal, Hyderabad.
3C. Labesh kumar, Department of Mechanical Engineering, Institute of Aeronautical Engineering, Dundigal, Hyderabad.
Manuscript received on September 15, 2019. | Revised Manuscript received on 24 September, 2019. | Manuscript published on October 10, 2019. | PP: 3869-3875 | Volume-8 Issue-12, October 2019. | Retrieval Number: L3374081219/2019©BEIESP | DOI: 10.35940/ijitee.L3374.1081219
Open Access | Ethics and Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: This paper deals with the experimental investigation and testing on a single point cutting tool with carbide inserts and high speed steel tool. Cutting tool has to be strong enough to withstand the wear resistance. It is to be proved that carbide inserts have better performance than HSS tools on machining operation. Components with higher surface quality, higher material removal rate in less time and lower tool wear is only possible by carbide insert tools. The tool material selected for this experiment are cemented & tungsten carbide inserts along with high speed steel tool on machining medium carbon steel EN19. The complete machining process is performed on cnc lathe machine Hence the intention of this project is to minimize the surface roughness, tool wear, machining time and increasing the material removal rate. Taguchi’s L9 orthogonal array is favor for this investigation work. The result obtained in this project can be further used for optimizing the process parameters there by optimized results helps the operator to improve the quality as well as production rate.
Keywords: Single Point Cutting Tool, Carbide Inserts, HSS, Surface Roughness, MRR, Tool Wear and Tool life.
Scope of the Article: Bio-Science and Bio-Technology