Experimental on Flexural Strength of Glass/Kevlar and Glass/Carbon Hybrid Composite Laminates
Ramya Suresh1, K. Senthilnathan2, S. Prasannaraj Yadav3, S. Karthick4
1Mrs. Ramya Suresh, Assistant Professor, Department of Mechanical Engineering, Easwari Engineering College, Chennai(Tamil Nadu), India.
2Mr. K. Senthilnathan, Assistant Professor, Department of Mechanical Engineering, Easwari Engineering College, Chennai(Tamil Nadu), India.
3Dr. S. Prasannaraj Yadav, Associate Professor, Department of Mechanical Engineering, Easwari Engineering College, Chennai (Tamil Nadu), India.
4Mr. S Karthick, Assistant Professor, Department of Mechanical Engineering, Easwari Engineering College, Chennai (Tamil Nadu), India.
Manuscript received on 04 October 2019 | Revised Manuscript received on 18 October 2019 | Manuscript Published on 26 December 2019 | PP: 45-48 | Volume-8 Issue-12S October 2019 | Retrieval Number: L101810812S19/2019©BEIESP | DOI: 10.35940/ijitee.L1018.10812S19
Open Access | Editorial and Publishing Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open-access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: Our present study deals with the investigation of flexural strength of Glass/Kevlar epoxy and glass/carbon epoxy hybrid laminates. Laminates of different stacking order were prepared and three point bending test were conducted on the hybrid laminates. From the experimental results, the flexural strength of different hybrid laminates was evaluated and comparisons were made.
Keywords: Hybrid, Three Point Bending, Glass/Carbon, Glass/Kevlar.
Scope of the Article: Composite Materials