Loading

Carrier to Intermodulation (C/I ratio) Calculations of a GaN 10W Class AB Power Amplifier
S. Elkhaldi1, M. Moubadir2, N. A Touhami3, M. Aghoutane4, T. Elhamadi5

1Said Elkhaldi, Department of Electronics and Telecommunications, University Abdelmalek Essaadi, Tetouan, Morocco.
2Mahmoud Moubadir, Department of Electronics and Telecommunications, University Abdelmalek Essaadi, Tetouan, Morocco.
3Naima Amar Touhami, Associate professor, Department of Electronics and Telecommunications, University Abdelmalek Essaadi, Tetouan, Morocco.
4Taj-Eddin Elhamadi, Department of Electronics and Telecommunications, University Abdelmalek Essaadi, Tetouan, Morocco.
5Mohamed Aghoutane, Associate Professor, Department of Electronics and Telecommunications, University Abdelmalek Essaadi, Tetouan, Morocco.
Manuscript received on May 16, 2020. | Revised Manuscript received on May 25, 2020. | Manuscript published on June 10, 2020. | PP: 887-890 | Volume-9 Issue-8, June 2020. | Retrieval Number: G5924059720/2020©BEIESP | DOI: 10.35940/ijitee.G5924.069820
Open Access | Ethics and Policies | Cite | Mendeley
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: This article presents the analysis and design of a circuit to generate 3rd- order intermodulation (IM3) products for a GaN 10W Class AB power amplifiers (PA), The intermodulation products can’t be eliminated by filters. So, it’s a critical problem to resolve in RF systems. The circuit has been studied using a two-tone signal at a center frequency of 3.7 GHz. The two tones test is applied to make a large signal analysis of the RF power amplifier. For this paper, the two frequencies are at (3.7 ± 0.005) GHz. The (C/I) ratio, is chosen to investigate the power amplifier non-linearity, and due to various causes, upper_ C/I and lower_ C/I, can be distinct. 
Keywords: Microwave Amplifier; two tones; harmonic balance simulation; Intermodulation distortion; the carrier to intermodulation distortion power ratio (C/I).
Scope of the Article: Microwave