Driver Drowsiness Detection System for Vehicle Safety
A. Subbarao1, K. Sahithya2
1Dr. A. Subbarao, Associate Professor, Department of Electronics and Communication Engineering, SR Engineering College, Warangal, Telangana, India.
2K. Sahithya, M. Tech Student, Department of Electronics and Communication Engineering, SR Engineering College, Warangal, Telangana, India.
Manuscript received on 10 April 2019 | Revised Manuscript received on 17 April 2019 | Manuscript Published on 26 July 2019 | PP: 815-819 | Volume-8 Issue-6S4 April 2019 | Retrieval Number: F11640486S419/19©BEIESP | DOI: 10.35940/ijitee.F1164.0486S419
Open Access | Editorial and Publishing Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open-access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: Detection of drowsiness of driver is a vehicle safety technology, which helps to put off accidents which caused by the driver being dozy. A variety of studies have recommended that around 20% of all road accidents are due to drowsiness of the driver. The developments of technologies for detecting or preventing drowsiness while driving is a major confront in accident evasion systems. Because of the peril of the tiredness while driving, different new methods need to be developed for counteracting the effect. The paper is based on a example for detection of drowsiness system. The intend of this paper is design of an automated system for safety of driver from improper driving. The system is designed such that it will precisely scrutinize the eye blink. In this paper, the eye blink of the driver is detected by using eye blink sensor which is IR based. The disparity across the eye will vary as per eye blink.The output is high, if the eye is closed or else output is low. It indicates closing or opening position of an eye. TheIR outputis given to circuit to signify the alarm. The controller will send a warning signal so that it is displayed on liquid crystal display screen. The buzzer, which is placed near the driver, will be activated and alters the driver when he falls asleep during driving. The alcohol sensor is also used to detect whether the driver is drunken which avoids accident caused by the drunken drivers. According to the intensity of light, the lights will be ON or OFF inside the vehicle, this saves power consumption. Tilt sensor is also used to detect whether the vehicle met with an accident or not.
Keywords: LPC2148, Drowsiness Detection, Eye Blink Sensor, GSM, GPS.
Scope of the Article: Communication