A Researchon Influence of Admixtureson Mechanical Properties of Fibre Reinforced Concrete
Pulisai1, G.B. Ramesh Kumar2
1Pulisai, M.E. Departement of Civil Engineering, Saveetha School of Engineering, Chennai (TamilNadu), India.
2Dr. G.B. Ramesh Kumar, P.H.D, Associate Professor, Departement of Structural Engineering, Saveetha School of Engineering, Chennai (TamilNadu), India.
Manuscript received on 05 April 2019 | Revised Manuscript received on 12 April 2019 | Manuscript Published on 26 July 2019 | PP: 269-270 | Volume-8 Issue-6S4 April 2019 | Retrieval Number: F10550486S419/19©BEIESP | DOI: 10.35940/ijitee.F1055.0486S419
Open Access | Editorial and Publishing Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open-access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: In this paper presents the mechanical properties of the fiber reinforced concrete. For that the experimental work should be done by using natural fiber that is coir ond it should be done on by using M5O grade of concrete. In this project we are going to use the admixtures also at different percentages by the replacement of the cement material. By adding the admixtures the characteristic strength of the concrete also improved when compared to the normal concrete. The mechanical properties like the compression strength , flexural strength, density and ductility of theconcrete be calculated .in this experimental work the coir fiber was added up to the 0.4% of the binder volume of the concrete mixture. In this work the admixtures like flyash and silica fumealso mixed at 10% and 20% respectively. By using this experimental work ,ductility ,modulus of elasticity and ultra pulse value ofreinforced concrete also determined.
Keywords: Modulus of Elasticity, Ultra Pulse Value, Silica Fume and Flyash.
Scope of the Article: Computational Techniques in Civil Engineering