Design and Implementation of a Corporate Fed Two Element Antennae Array using Miters
G. V. P. Pranathi1, N. Deepika Rani2, Leela Kumari .B3
1G. V. P. Pranathi*, Assistant Professor, G. V. P. College of Engineering (Autonomous), Jawaharlal Nehru Technological University, Kakinada, Andhra Pradesh, India.
2Dr. N. Deepika Rani, Professor, Department of M. Tech, G. V. P. College of Engineering (Autonomous), Jawaharlal Nehru Technological University, Kakinada, Andhra Pradesh, India.
3Dr. Leela Kumari. B, Assistant Professor, Jawaharlal Nehru Technological University, Kakinada, Andhra Pradesh, India.
Manuscript received on January 10, 2020. | Revised Manuscript received on January 20, 2020. | Manuscript published on February 10, 2020. | PP: 2777-2781 | Volume-9 Issue-4, February 2020. | Retrieval Number: D1872029420/2020©BEIESP | DOI: 10.35940/ijitee.D1872.029420
Open Access | Ethics and Policies | Cite | Mendeley
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: In wireless communication systems, designing of antennae with required parameters is an challenging issue. So, The approach in this paper is to design a corporate fed 2 element antenna array is designed to operate at 2.4 GHz using an FR-4 substrate of height h=1.6mm. For wireless application all the antenna parameters are analysed for two element array antenna with element spacing λ, λ/2 and with miters. It is observed that bandwidth decreases by decreasing the element spacing. But by using miters for antenna with element spacing bandwidth and reflection coefficient are improved. All the antennae are fabricated and tested using VNA E5071C.
Keywords: Corporate fed , Element Spacing and Miters
Scope of the Article: Microstrip Antenna Design and Application