Generator Performance in Steam Power Plant
Ramadoni Syahputra1, Andi Wahyu Nugroho2, Kunnu Purwanto3
1Ramadoni Syahputra, Department of Electrical Engineering, Universitas Muhammadiyah Yogyakarta, Yogyakarta, Indonesia.
2Andi Wahyu Nugroho, Department of Electrical Engineering, Universitas Muhammadiyah Yogyakarta, Yogyakarta, Indonesia.
3Kunnu Purwanto, Department of Electrical Engineering, Universitas Muhammadiyah Yogyakarta, Yogyakarta, Indonesia.
Manuscript received on November 14, 2019. | Revised Manuscript received on 24 November, 2019. | Manuscript published on December 10, 2019. | PP: 2711-2716 | Volume-9 Issue-2, December 2019. | Retrieval Number: B7505129219/2019©BEIESP | DOI: 10.35940/ijitee.B7505.129219
Open Access | Ethics and Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: This paper presents generator performance in a steam power plant. Location of this research is steam power plant, PT Paiton Unit 7, on Jalan Surabaya – Situbondo km 141, Binor, Paiton, Probolinggo, East Java, Indonesia. In the steam power plant, PT Paiton Unit 7 is used synchronous generators. The generator is said to be synchronous if it meets the requirements, among others, the phase sequence must be the same, the voltage must be the same, the frequency must be the same, and the phase angle must be the same. The performance of the generator can be known by looking at changes in active power, changes in output voltage, changes in output current, changes in reactive power in MVAR, changes in apparent power in MVA, changes in power factor, changes in frequency, changes in efficiency and percentage of the supply voltage.
Keywords: Generator, Performance, Steam Power Plant.
Scope of the Article: Frequency Selective Surface