Design and Fabrication of Cost Effective Mould Tool
J. Senthil1, M. Saravanan2, Alby Berchmans3, Bipin Wilson4, Christin Varghese5
1J. Senthil, Associate Professor, Department of Mechanical Engineering, Aarupadai Veedu Institute of Technology, Vinayaka Mission’s Research Foundation, Deemed to be University, Chennai (Tamil Nadu), India.
2M. Saravanan, Assistant Professor, Department of Mechanical, Aarupadai Veedu of Technology, Vinayaka Mission’s Research Foundation, Deemed to be University, Chennai (Tamil Nadu), India.
3Alby Berchmans, Department of Mechanical Engineering, Aarupadai Veedu Institute of Technology, Vinayaka Mission’s Research Foundation, Deemed to be University, Chennai (Tamil Nadu), India.
4Bipin Wilson, Department of Mechanical Engineering, Aarupadai Veedu Institute of Technology, Vinayaka Mission’s Research Foundation, Deemed to be University, Chennai (Tamil Nadu), India.
5Christin Varghese, UG Student, Department of Mechanical Engineering, Aarupadai Veedu Institute of Technology, Vinayaka Mission’s Research Foundation, Deemed to be University, Chennai (Tamil Nadu), India.
Manuscript received on 09 November 2019 | Revised Manuscript received on 17 December 2019 | Manuscript Published on 31 December 2019 | PP: 498-504 | Volume-9 Issue-2S4 December 2019 | Retrieval Number: B12211292S419/2019©BEIESP | DOI: 10.35940/ijitee.B1221.1292S419
Open Access | Editorial and Publishing Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open-access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: As one third of the plastics are injection moulded, the detailed study of design and fabrication of cost effective mould becomes inevitable. This work focuses on the elaborate procedure for designing and fabricating a mould tool. Optimal setting up of injection molding process variables plays a very important role in controlling the quality of the injection molded product. We designed and produced cable clamp for various purposes. What makes this product unique from others is that low cost and high productivity. Solid edge Software is used for designing and analysis. Material used for this production is polypropylene. The production rate will be high with low cost.
Keywords: Injection Molding, Injection Molding Machine, Polypropylene, Design of the Mold Tool, Manufacturing of Mold Tool.
Scope of the Article: Machine Design