Fabrication and Microstructure Examination of Al-Sic Mmcs Via Stir Casting Technique
Sathiyaraj. S1, B. Selvababu2, Maqsood Ahmed3, Baskar Balaji4, Harsha Vardhan5
1Sathiyaraj. S, Department of Mechanical, Aarupadai Veedu Institute of Technology, Vinayaka Mission’s Research Foundation, Deemed to be University, Chennai (Tamil Nadu), India.
2B. Selvababu, Department of Mechanical, Aarupadai Veedu Institute of Technology, Vinayaka Mission’s Research Foundation, Deemed to be University, (Tamil Nadu), India.
3Maqsood Ahmed, Department of Mechanical, Aarupadai Veedu Institute of Technology, Vinayaka Mission’s Research Foundation, Deemed to be University, (Tamil Nadu), India.
4Baskar Balaji, Department of Mechanical, Aarupadai Veedu Institute of Technology, Vinayaka Mission’s Research Foundation, Deemed to be University, (Tamil Nadu), India.
5Harsha Vardhan, Department of Mechanical, Aarupadai Veedu Institute of Technology, Vinayaka Mission’s Research Foundation, Deemed to be University, (Tamil Nadu), India.
Manuscript received on 08 November 2019 | Revised Manuscript received on 16 December 2019 | Manuscript Published on 31 December 2019 | PP: 461-464 | Volume-9 Issue-2S4 December 2019 | Retrieval Number: B12131292S419/2019©BEIESP | DOI: 10.35940/ijitee.B1213.1292S419
Open Access | Editorial and Publishing Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open-access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: The function of engineering materials in the development of contemporary technology like steel Matrix Composites (MMCs) have evoked a keen hobby these days for capacity packages in aerospace and automobile industries as a result of their superior power to weight ratio and excessive temperature resistance. Aluminium (6061) and silicon Carbide (Powder) has been selected as matrix and reinforcement cloth respectively. On this gift look at an attempt is made to broaden Aluminium primarily based silicon carbide particulate MMCs. Stir casting is one of the maximum cost powerful technique of processing MMC and to gain homogenous dispersion of ceramic material. Al–SiC composites containing special weight chance three. Five %, 7.Zero% and 10.5% of B4C have been fabricated via way of stir casting technique. Experiments are conducted with the aid of numerous weight fraction of SiC (3.5%, 7.Zero% and 10.Five%), on the equal time as preserving all different parameters normal. The distribution of reinforcement and percent of composition are examined thru Optical Emission Spectrometer (OES). The compositions in their micro structural features were determined via Metallurgical Microscope.
Keywords: Silicon Carbide, Stir Casting, Aluminium and Metal Matrix Composite.
Scope of the Article: Composite Materials