RFID Based Material Sorting System using Siemens DCS Controller
L. Chitra1, Sunkrutha S2, Prashant Pradhan3
1Dr. L. Chitra, Associate Professor and Head, Department of EEE, Aarupadai Veedu Institute of Technology, Chennai (Tamil Nadu), India.
2Sunkrutha S, UG Student, Department of Mechatronics, Aarupadai Veedu Instituite of Technology, Vinayaka Missions Research Foundation, Chennai (Tamil Nadu), India.
3Prashant Pradhan, UG Student, Department of Mechatronics, Aarupadai Veedu Instituite of Technology, Vinayaka Missions Research Foundation, Chennai (Tamil Nadu), India.
Manuscript received on 12 November 2019 | Revised Manuscript received on 20 December 2019 | Manuscript Published on 31 December 2019 | PP: 569-572 | Volume-9 Issue-2S4 December 2019 | Retrieval Number: B12021292S419/2019©BEIESP | DOI: 10.35940/ijitee.B1202.1292S419
Open Access | Editorial and Publishing Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open-access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: The SIMATIC RF200 IO-link is an inductive identification system module which is compatible with the ISO 15693 standard and this is specifically intended to be used in the industry for the control and optimization of materialistic flow. Here the field bus distributed control system integrates with the RFID material this makes the sorting system more controlled and flexible. The system can be utilized for energy management also. The system can be extended by using it for real time power monitoring and control using dcs from multiple power sources. The profinet and profibus cables are used as bus interface here to interlace the simatic PCS 7 with the RFID and the reader.
Keywords: DCS Mechanism, SIMATIC, SCADA.
Scope of the Article: RFID Network and Applications