About the Destruction of Grain in the Working Chamber of the Crusher
Аlijanov Djabpar1, Abdurokhmonov Shavkatjon2, Umirov Noshir3, Ganiboeva Ergashkhon4, Khudaykulov Rustam5, Bozorboyev Abbos6
1Аlijanov Djabpar, Tashkent Institute of Irrigation and Agricultural Mechanization Engineers, Tashkent, Uzbekistan.
2Abdurokhmonov Shavkatjon, Tashkent Institute of Irrigation and Agricultural Mechanization Engineers, Tashkent, Uzbekistan.
3Umirov Noshir, Tashkent Institute of Irrigation and Agricultural Mechanization Engineers, Tashkent, Uzbekistan.
4Ganiboeva Ergashkhon, Tashkent Institute of Irrigation and Agricultural Mechanization Engineers, Tashkent, Uzbekistan.
5Khudaykulov Rustam, Tashkent Institute of Irrigation and Agricultural Mechanization Engineers, Tashkent, Uzbekistan.
6Bozorboyev Abbos, Tashkent Institute of Irrigation and Agricultural Mechanization Engineers, Tashkent, Uzbekistan.
Manuscript received on 27 November 2019 | Revised Manuscript received on 07 December 2019 | Manuscript Published on 14 December 2019 | PP: 436-439 | Volume-9 Issue-1S November 2019 | Retrieval Number: A10911191S19/2019©BEIESP | DOI: 10.35940/ijitee.A1091.1191S19
Open Access | Editorial and Publishing Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open-access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: The article shows the process of grain destruction in the working chamber, the influence of the inclination angles of the stator and rotor on the quality of grain destruction is determined, in addition, the results of calculating the limiting values and diameters of the crushed material particles are given.
Keywords: Rotor, Stator, Working Chamber, Tilt Angle, Diameter, Radius, Grains.
Scope of the Article: Social Sciences