Fabrication and Characterization of Az91e Hybrid Metal Matrix Composites
Gari Surya Chandra Swamy1, P. Jamaleswara Kumar2, U.S Ramakanth3
1Gari Surya Chandra Swamy*, Pursuing Research, Department of Mechanical Engineering in KL University, Vijayawada, Andhra Pradesh.
2P. Jamaleswara Kumar, Doctorate Degree, Mechanical Engineering from Andhra University, Visakhapatnam, Andhra Pradesh, India
3U.S Ramakanth, PhD degree in Mechanical Engineering from Andhra University, Visakhapatnam, Andhra Pradesh, India
Manuscript received on April 20, 2020. | Revised Manuscript received on April 29, 2020. | Manuscript published on May 10, 2020. | PP: 163-167 | Volume-9 Issue-7, May 2020. | Retrieval Number: G4956059720/2020©BEIESP | DOI: 10.35940/ijitee.G4956.059720
Open Access | Ethics and Policies | Cite | Mendeley
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: The current work expects to decide the attributes of compression of the (Magnesium composite) AZ 91E-Zro2-Fly Ash Hybrid Metal Matrix utilizing the conventional explanatory strategy and limited component technique. Fly ash and ZrO2 taken as equal weight proportions, composites are fabricated by means of a vortex method under the path of stir casting. The density and fracture toughness were found experimentally, the experimental density was decreased compare to the theoretical density, but the density is increased slightly for composites compare to the base material. The fracture toughness is decreased for composites compare to the base material; this is due to the improvement of the grains by adding strengthening molecules. The compressive strength was decreased by decreasing of the height of the deformation in percentage for base material and the composites of H/D 1.0 and 1.5. The compressive strength is high for the composites compare to the base material even the density of the composite is little bit high, hence suggested that composite system gives the better compressive strength results.
Keywords: Density, hybrid metal matrix, Materials, Z91E, Zro2/Fly Ash.
Scope of the Article: Composite Materials