B12191292S419

Coordinate Measuring Machine Retrofit and Technological Upgradation
S. Ashokkumar¹, S. Sathiyaraj², R. Mahesh³, Blesson Achankunju⁴, Karthik R⁵, Jean Joseph⁶

¹S. Ashokkumar, Assistant Professor, Department of Mechanical Engineering, Aarupadai Veedu Institute of Technology Vinayaka Mission Research Foundation, Chennai (Tamil Nadu), India.

²S. Sathiyaraj, Assistant Professor, Department of Mechanical Engineering, Aarupadai Veedu Institute of Technology, Vinayaka Mission Research Foundation, Chennai (Tamil Nadu), India.

³R. Mahesh, Assistant Professor, Department of Mechanical Engineering, Aarupadai Veedu Institute of Technology, Vinayaka Mission Research Foundation, Chennai (Tamil Nadu), India.

⁴Blesson Achankunju, Department of Mechanical Engineering, Aarupadai Veedu Institute of Technology, Vinayaka Mission Research Foundation, Chennai (Tamil Nadu), India.

⁵Karthik R, Department of Mechanical Engineering, Aarupadai Veedu Institute of Technology, Vinayaka Mission Research Foundation, Chennai (Tamil Nadu), India.

⁶Jean Joseph, Department of Mechanical Engineering, Aarupadai Veedu Institute of Technology, Vinayaka Mission Research Foundation, Chennai (Tamil Nadu), India.

Manuscript received on 09 November 2019 | Revised Manuscript received on 17 December 2019 | Manuscript Published on 31 December 2019 | PP: 488-491 | Volume-9 Issue-2S4 December 2019 | Retrieval Number: B12191292S419/2019©BEIESP | DOI: 10.35940/ijitee.B1219.1292S419

Open Access | Editorial and Publishing Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open-access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: Planned To Import Axis Motors and Air Bearing From U.S. •Planned To Import 5axis Probe Head, Probe Head & Machine Controller, 5 Axis Measurement Software From U.K. •Machine Axis X-900mm, Y-1200mm, Z-800mm, A -115°To 115°, B- Infinity Position. •Being Five Axis Technologies We Can Minimize the Measurement Time By 70%, So Throughput Of The Machine Can Be Increased. •Being Five Axis Technologies We Can Rotate The Probe Head With Infinite Positions Which Can Minimize The Stylus Calibration & Increases Machine Accuracy. •CMM Retrofit, Technological Upgradation & Calibration Cost Will Come Around 80 Lakhs.

Keywords: 5 Axis CMM Technology, 5 Axis Machine & Probe Controller, 5 axis Measurement Software & CMM Calibration.
Scope of the Article: Machine Design