Characteristic Identification Methodology for 2D Sheet Metal Components
Vijayakumar K1, L.Prabhu2, Tony O T3, Akshith M S4, Gokul Kannan5
1Vijayakumar K, Assistant Professor, Department of Mechanical Engineering, Aarupadai Veedu Institute of Technology, Vinayaka Mission Research Foundation, Chennai (Tamil Nadu), India.
2L. Prabhu, Associate Professor, Department of Mechanical Engineering, Aarupadai Veedu Institute of Technology, Vinayaka Mission Research Foundation, Chennai (Tamil Nadu), India.
3Tony O T, UG Student, Department of Mechanical Engineering, Aarupadai Veedu Institute of Technology, Vinayaka Mission Research Foundation, Chennai (Tamil Nadu), India.
4Akshith M S, UG Student, Assistant Professor, Department of Mechanical Engineering, Aarupadai Veedu Institute of Technology, Vinayaka Mission Research Foundation, Chennai (Tamil Nadu), India.
5Gokul Kannan, UG Student, Department of Mechanical Engineering, Aarupadai Veedu Institute of Technology, Vinayaka Mission Research Foundation, Chennai (Tamil Nadu), India.
Manuscript received on 08 November 2019 | Revised Manuscript received on 16 December 2019 | Manuscript Published on 31 December 2019 | PP: 448-452 | Volume-9 Issue-2S4 December 2019 | Retrieval Number: B12101292S419/2019©BEIESP | DOI: 10.35940/ijitee.B1210.1292S419
Open Access | Editorial and Publishing Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open-access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: In the computer-integrated production environment, computer-assisted process planning is a key area which analyses the Computer aided Design server collects information about design and converts it into the necessary information about manufacturing. To identify 2D sheet shearing operations from the nested architecture provided by a wire frame template, a feature identification procedure has been suggested. Basically, the method uses geometric data to determine different groups of objects. Entity groups are categorized into a number of features for raw resources, a set of boundary features, and a set of interior features. There seems to be a special classification of the feature functions inclusion to both the set of boundary functions. Components (i.e. boundary elements set together with their inside feature set components) are lexicographically arranged. Based on the suggested categorization for shearing practices and using multiple feature sets, processing features were defined. The technique listed above, definitions are explained along with its principles. This is performed in the C environment and from the DXF output directory of AutoCAD geometric information is retrieved.
Keywords: Computer-integrated Production, Shearing Practices, Entity Groups, Sheet Metal Parts.
Scope of the Article: Metallurgy