OVAT Analysis for Surface Finish in CNC Turning
M. S. Harne1, Manish M. Dandge2
1M.S. Harne, Professor, Department of Mechanical Engineering, Government College of Engineering, Aurangabad (Maharashtra), India.
2Manish M. Dandge, PG Student, Department of Mechanical Engineering, Government College of Engineering, Aurangabad (Maharashtra), India.
Manuscript received on 14 August 2014 | Revised Manuscript received on 22 August 2014 | Manuscript Published on 30 August 2014 | PP: 9-12 | Volume-4 Issue-3, August 2014 | Retrieval Number: C1758084314/14©BEIESP
Open Access | Editorial and Publishing Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: Metal cutting is one of the most important and widely used manufacturing processes in engineering industries and in today’s manufacturing scenario, optimization of metal cutting process is essential for a manufacturing unit to respond effectively to severe competitiveness and increasing demand of quality which has to be achieved at minimal cost. Surface finish is one of the prime requirements of customers for machined parts. The purpose of this research paper is focused on the analysis of optimum cutting conditions to get lowest surface finish in facing by regression analysis. This paper presents an experimental study to investigate the effects of cutting parameters like Cutting speed, feed and depth of cut on surface finish on 16MnCr5H Steel
Keywords: CNC Turning, Surface Finish, One Variable at a Time Analysis.
Scope of the Article: Frequency Selective Surface