Transient Stability Analysis of Six Phase Transmission System with Integration of WPGS and STATCOM with Smart Grid
T. Charan Singh1, K. Raghu Ram2, B.V. Sanker Ram3
1T.Charan Singh, Department of Electrical and Electronics Engineering, Swarna Bharathi Institute of Science & Technology, JNTUH, Khammam (Telangana), India.
2K.Raghu Ram, Department of Electrical and Electronics Engineering, Laqshya Institute of Technology& Sciences, JNTUH, Khammam (Telangana), India.
3B.V. Sanker Ram, Department of Electrical and Electronics Engineering, JNTU College of Engineering, JNTU, Kuatpally, Hyderabad (Telangana), India.
Manuscript received on 05 February 2019 | Revised Manuscript received on 13 February 2019 | Manuscript published on 28 February 2019 | PP: 260-266 | Volume-8 Issue-4, February 2019 | Retrieval Number: D2736028419/19©BEIESP
Open Access | Ethics and Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: In recent times Transient stability analysis has become a major concern in the operation of power systems due to the rising stress on power system networks. These difficulties require assessment of a power system’s ability to with stand instability while maintaining the excellence of service. Many different techniques have been projected for transient stability analysis in power systems, especially for a multi machine system. This paper describes simulation of six phase multi-machine power system (MMPS) with wind power generator integration in dynamic operation. By the introduction of wind power generation system (WPGS) in multi-machine at weak bus in parallel with STATCOM can improve the generator load angle deviation during fault condition. The MMPS performance is analysed by placing six phase line between different buses. The replacement of transmission line can reduces the line impedances, which results in reduced angle distortion of machines and improved stability .The proposed WPGS based MMPS phase angle and frequency variations are analyzed during symmetrical and asymmetrical fault conditions. The MATLAB/Simulation software is used to test the behavior of proposed system.
Keyword: Wind System, Six Phase Transmission Line, STATCOM, Multi-Machine System, Stability.
Scope of the Article: Smart Grid Communications