Loading

Effects of Partial Replacement of Fine Aggregate with Polypropylene & Jute Fiber of Different Ratio in Concrete M25 Grade
Abdul Jalil Najibzada1, Shalika Mehta2

1Abdul Jalil Najibzada, Department of Civil Engineering, Chandigarh University, M.E. Construction Technology & Management, Kabul, Afghanistan.
2Shalika Mehta, Department of Civil Engineering, Chandigarh University/ Assistant Professor, Chandigarh, India.

Manuscript received on 02 June 2019 | Revised Manuscript received on 10 June 2019 | Manuscript published on 30 June 2019 | PP: 3346-3350 | Volume-8 Issue-8, June 2019 | Retrieval Number: H7232068819/19©BEIESP
Open Access | Ethics and Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: (Please read carefully abstract of the template). Jute fiber is a natural fiber that is an environmentally friendly material popularly known as golden fiber. Jute fiber is the most available fiber in India with fewer expenses. Polypropylene fiber is made by synthetic hydrocarbon polymer and has several advantages over other fibers: corrosion-resistant, durability, constructability with light-weight, abrasion resistant, chemical resistant. The aim of the study was to check the effect of using polypropylene and jute fiber in concrete as compared to conventional concrete M25 grade by testing in three different test methods like compressive strength test, split tensile strength test, and flexural strength test as per IS 10262:1082 code. The materials required for this experimental study are Portland Pozzolana Cement (PPC), coarse aggregate, fine aggregate, polypropylene fiber and jute fiber, water. And to determinate compressive strength test 36 cube specimens of size (150*150*150) mm, spilt tensile strength test 36-cylinder specimens’ size of (150*300) mm, and flexural strength test 36 beam specimens’ size of (100*100*500) and all mixes at 7 days, 14 days, and 28 days after casting and curing were tested.
Keyword: Polypropylene Fiber, Jute Fiber, Pozzolana Portland Cement, Compressive strength, Split Tensile Strength, Flexural Strength.
Scope of the Article: Concrete Structures.