Experimental Research on the Combined Effect of Bagasse and Steel Slag for the Mechanical and Durability Possessions of Concrete
Bindu Sharma1, Rajeev Kumar2
1Bindu Sharma, M.Tech Structure Engineering Student Dept. Civil Engg, Chandigarh University, Mohali, (Punjab), India.
2ER. Rajeev Kumar, Assistant Professor, Civil Department, Chandigarh University, Mohali, (Punjab), India.
Manuscript received on 02 June 2019 | Revised Manuscript received on 10 June 2019 | Manuscript published on 30 June 2019 | PP: 1396-1398 | Volume-8 Issue-8, June 2019 | Retrieval Number: H7106068819/19©BEIESP
Open Access | Ethics and Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: Concrete was the first material to be used as the construction material. Concrete has good strength in compression but its tensile strength is less as compared to compressive strength Concrete has fine cracks and pours .Carbon is the only mineral that influence the strength of steel maximum .Carbon increase strength and brittleness in a material which is present in steel as well as bagasse. Sand is natural resources and the rate of sand increases day by day due to high demand .On the other hand wastes of steel industries like steel slag is harmful for environment. Steel slag has been studied to put on various kind of construction like buildings and pavement .It was observed that the 10-15% replacement of cement by bagasse is optimum range which gives the high compressive strength and replacement of F.A within range of 30-40% with steel slag gives high value of compressive strength. The aim of research was to discuss the fresh and hardened properties of both material together repacing the cement with percentage of 5%,10%,15% and 20% and fine aggregate was replace with steel slag with 10%,20%,30% and 40%. Behave substitution of some cement by bagasse and fine aggregate by steel slag decreases the cost of material.
Keyword: Steel slag, Bagasse ash, Compressive strength, Split Tensile Strength and Flexural Strength.
Scope of the Article: Mechanical Design.