Automatic Control and Alert Message System for Intra Venous Fluid Level
T.Thangam1, T. Murugajothi2, R.Rajakumari3, T.Suganya Thevi4, M.Thiruveni5
1T.Thangam, Department of Electronics and Communication, PSNACET, Dindigul, Tamil Nadu, India.
2T. Murugajothi, Department of Electronics and Communication, PSNACET, Dindigul, Tamil Nadu, India.
3R.Rajakumari, Department of Electronics and Communication, PSNACET, Dindigul, Tamil Nadu, India.
4T.Suganya Thevi, Department of Electronics and Communication, PSNACET, Dindigul, Tamil Nadu, India.
5M.Thiruveni, Department of Electronics and Communication, PSNACET, Dindigul, Tamil Nadu, India.
Manuscript received on October 12, 2019. | Revised Manuscript received on 22 October, 2019. | Manuscript published on November 10, 2019. | PP: 2933-2936 | Volume-9 Issue-1, November 2019. | Retrieval Number: A9111119119/2019©BEIESP | DOI: 10.35940/ijitee.A9111.119119
Open Access | Ethics and Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: The objective of this paper is to find a solution for the problem arising in IV drip bottles. We detected glucose levels in glucose trip bottles, which are used manually in hospitals. At the point when the glucose container is half vacant, an admonition message is given to send to the attendants working there. Three significant modules are utilized for this reason. Level sensor that can identify fluid levels in IV trickle bottles and is utilized as an info module used to send information to the controller. The PIC (Programmable Interface Controller) board is utilized as a controller module that procedures the information got from the sensor. The MGM module is utilized as a yield module dependent on the control given by the controller. It sends an alarm message to medical attendants’ telephone numbers.The another one is, automatically the liquid flow in the tube will be stopped by using the solenoid valve, only when the liquid level in the drip bottles is about to minimum extend.
Keywords: Programmable Interface Controller, Arduino AT Mega Board, IV Drip Bottles;
Scope of the Article: Fluid Mechanics