Optimum Shape and Position of Outrigger System for High Rise Building under Earthquake Loading
Ritu Khandelwal1, Raghvendra Singh2
1Ritu Khandelwal*, Student Computer Aided Structural Designing and Drafting, Department of Civil Engineering, Ujjain Engineering College, Ujjain, M.P., India.
2Dr.Raghvendra Singh, Professor, Department of Civil Engineering, Ujjain Engineering College, Ujjain, M.P., India.
Manuscript received on December 14, 2019. | Revised Manuscript received on December 20, 2019. | Manuscript published on January 10, 2020. | PP: 3268-3275 | Volume-9 Issue-3, January 2020. | Retrieval Number: C8961019320/2020©BEIESP | DOI: 10.35940/ijitee.C8961.019320
Open Access | Ethics and Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: The advancement of high rise building has been increasing on a large scale. In tall structures shear wall often resisted the lateral load induced by wind and earthquake but as the building height increases the stiffness of the structure reduces. To provide sufficient lateral stiffness of the structure implementation of outrigger system between the shear walls and peripheral columns is often used. The aim of this study is to identify the optimum shape of outrigger belt truss in tall buildings under earthquake load condition. A thirty storey with single belt truss, forty five storeys with two belt trusses and sixty storey with three belt trusses structure was investigated with three different shape outrigger belt truss that is X, V and N. The optimum location by providing single belt truss at 10th story, 15th story and at top story in thirty story building is considered in the analysis. From the analysis a comparative study are made with and without variation of shape of outrigger with belt truss with parameters likes storey displacement and storey drift under earthquake loading and get a optimum position of outrigger belt truss for thirty storey building with single belt trusses placing at different locations.
Keywords: Outrigger System, Earthquake Load, Optimum Shape and Position of Belt Truss, Storey Drift, Lateral Displacement.
Scope of the Article: Earthquake Engineering