Loading

Development of Monitoring System using the Internet of Things for Industrial Revolution 4.0
Siti Aisyah Binti Jaafar1, Sukarnur Che Abdullah2

1Siti Aisyah Binti Jaafar*, Faculty of Mechanical Engineering, University Technology MARA (UiTM), Shah Alam, Selangor, Malaysia.
2Sukarnur Che Abdullah, Faculty of Mechanical Engineering, University Technology MARA (UiTM), Shah Alam, Selangor, Malaysia.
Manuscript received on December 13, 2019. | Revised Manuscript received on December 22, 2019. | Manuscript published on January 10, 2020. | PP: 2790-2794 | Volume-9 Issue-3, January 2020. | Retrieval Number: C9213019320/2020©BEIESP | DOI: 10.35940/ijitee.C9213.019320
Open Access | Ethics and Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: The fourth industrial revolution represents smarter systems, faster and more optimized system of artificial intelligence, which involves control systems and sensors networks. In this paper, the concept of the Internet of Things (IoT) was applied preliminarily to create the connection between machine and the user, using a sensor, a processor such as Raspberry Pi, and IoT platform application such as Blynk in the smartphone. The simple IR 4.0 prototype system and IoT apps were developed in order to create a connection between sensors and user through the internet consisting of a temperature and humidity sensor, which is DHT11 and a Raspberry Pi 3 Model B. The smartphone application would be developed through the Blynk application for this simple prototype system. The graphical user interface GUI was built within the Blynk app and link it to the sensor which is already connected to the Raspberry Pi. The analysis that was done upon the system is by varying the stimuli to the sensors, which is a hairdryer with three levels of heat and observe the relative change of the reading of temperature and percentage of humidity on the apps. Therefore, the preliminary result shows an increase in temperature as the heat level increases. On the other hand, the percentage of humidity becomes lower as the temperature goes higher. Based on the results and the analysis, it had shown that the IR 4.0 prototype system of IoT monitoring can connect between the sensor and the smartphone application with real-time monitoring through the internet. 
Keywords:  Internet of things, Industrial revolution 4.0, ICT, Industrial process, Cyber
Scope of the Article:  Internet of Things (IoT)